Flow Test Table

Desc : Flow Table Apparatus (As per IS 9103: 1999) The flow table apparatus shall be constructed in accordance with Fig. 1A and 1B. Flow table top shall be constructed from a flat metal plate of minimum thickness 1.5 mm. The top shall have a plan area of 700 mm × 700 mm and a flatness of within 1.5 mm. The centre of the table shall be scribed with a cross, the lines of which run parallel to and out to the edges of the plate, and with a central circle 200 mm in diameter. The under surface of the plate shall be reinforced in order to prevent distortion of the flat surface. The front of the flow table top shall be provided with a lifting handle. The total mass of the flow table top shall be 16 ± 1 kg.

The mould is made of a metal readily not attacked by cement paste or liable to rust and of minimum thickness 1.5 mm. The interior of the mould shall be smooth and free from projections, such as protruding rivets, and shall be free from dents.

The tamping bar shall be made of a suitable hardwood.

Price : Rs. 11000

Desc : Flow Table conforming to specifications and tolerance in accordance to IS 5512 . Consists of brass top of 250mm dia . complete with Brass Mould

Price : Rs. 9500

Desc : Flow Table conforming to specifications and tolerance in accordance to IS 6939 part 8 consists of a steel table top 300 mm dia ground and polished with three inscribed annular circles 70, 100 , & 190 mm diam arranged by compaction cave a free fall of 12.5mm

Complete with conical Mould 65mm diam. (big end) and 40 mm diam. (narrow end) and 90 mm height.

Price : Rs. 8500

Desc : Flow table. Conforming to specifications and tolerance in accordance to I.S. 1199: Rs. 29800/-
Designed for determination the flow of Portland cement concrete. The tabletop is 76.2cm diam finally machined from a solid casting; the integral cast ribs are also designed for support and strength. The stand is fabricated out of cast iron and is on sturdy construction. Holes for mounting on foundation are drilled in the base plate. The ground and polished steel cam is designed to drop 12.5mm
Manually operated unit.

Flow table as above but top made of solid brass/gun metal instead of steel.: Rs. 55600/-

Flow table as above electrically operated but top plate is made out of brass/gun metal.: Rs. 68800/-

Flow table as above made of mild steel electrically operated, fabricated out of steel top plate.: Rs. 39500/-